Datasheet EX-9486-W is designed to operate serial ports through wireless(Wi-Fi 802.11b & g) or entity line(RJ-45 cable) over 100Mbit/s Ethernet networks. The data is transmitted via TCP/IP protocol. Therefore control is available via Ethernet, Intranet and Internet. EX-9486-W is packaged in a case well suited for industrial environments. All serial ports operate in common RS-232 mode , industrial RS-422 and RS-485 modes configuration. EX-9486-W is a low-cost, high performance design. By careful selecting high quality with competitive prices components in the world, products made network connectivity possible with affordable cost for virtually all kinds of devices. The EX-9486-W can connect the Remote I/O Control module of EX9000 Series for EX9000 Series to Wireless by RS-232/422/485. This operation manual will guide you step by step for the various functions of the EX-9486-W. Key Specifications/Special Features
WLAN
Standard Compliance: IEEE 802.11b/g
Spread Spectrum Technology: DSSS, OFDM
Tx Power 11b: Maximum 20 dBm
Tx Power 11g: Maximum 18 dBm
Rx Sensitivity: -70 dBm @ 54 Mbps, -85 dBm @ 11Mbps
Transmission Rate: 54 Mbps (max.) with auto fallback (54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2,1 Mbps)
Transmission distance: Up to 300 meters(@12 Mbps, in open areas)
Security: WEP 64-bit/128-bit data encryption, AES, WPA2
Antenna Connector: Reverse SMA
Network Mode: Infrastructure, Ad-Hoc
LAN for configuration / Ethernet hub
Ethernet: 10/100 Mbps, RJ45
Protection: Built-in 1.5 KV magnetic isolation Serial
No. of ports: 1 RS-232/422/485 port, male DB9, S/W selectable
RS-232 Signals: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422 Signal : Tx+ , Tx- , Rx+ , Rx – ( Surge Protect )
RS-485 Signal : Data+ , Data- ( Surge Protect )
Serial Line Protection: 15 KV ESD for all signals Serial Communication Parameters
Parity: None, Even, Odd, Space, Mark
Data bits: 5, 6, 7, 8
Stop bits: 1, 1.5, 2
Flow control: RTS/CTS, XON/XOFF
Speed: 110 bps to 460.8+ Kbps Power Requirements
Power input 1: 12 VDC Environmental
Operating Temperature: -10 to 70°C (32 to 131°F), 5 to 95% RH
Storage Temperature:-20 to 85°C (-4 to 185°F), 5 to 95%RH Regulatory Approvals
RoHS
EMC: FCC Class A, CE Class A Software Features
Protocols: ICMP, IP, TCP, UDP, DHCP, BootP, ARP / RARP, Telnet, RTelnet, DNS, SNMP MIB II, HTTP, SMTP, SNTP
Serial mode: Virtual Com / TCP Server / TCP Client / UDP / Serial Tunnel with advanced settings of
TCP Alive Check Timeout
Inactivity Timeout
Delimiter for Data Packing
Force TX Timeout for Data Packing 4 Hosts simultaneous connection:
Virtual Com / TCP server / TCP Client (only raw data)
Security: HTTPS, SSH v2
Programmable (Optional)
Event notification by email / SNMP trap
SNMP Trap
Cold/Warm Start
DSR, DCD Changed
IP Changed
Authentication Fail |
